Design for manufacturing: design parts that are easy to make
Written by LitCareer · 12 Oct 2026 · 2 min read
Practical DFM rules for machining, sheet metal, moulding and assembly that cut cost and delays.
Why DFM matters
A design that works on screen may be expensive or impossible to make. Design for manufacturing (DFM) means considering the manufacturing process from the start, so parts are cheaper, faster and more consistent to produce.
General principles
- Simplify: fewer features and fewer parts mean lower cost.
- Standardise: use standard hole sizes, fasteners, materials and stock sizes.
- Specify tolerances only as tight as function requires. Tight tolerances increase cost sharply.
- Talk to manufacturing early and ask what drives cost for them.
Machined parts
- Use internal corner radii that match standard cutter sizes; sharp internal corners can't be milled.
- Avoid very deep, narrow pockets and holes.
- Minimise the number of setups so the part can be machined from as few directions as possible.
- Avoid unnecessary fine surface finishes.
Sheet metal parts
- Keep a consistent thickness and bend radius.
- Keep holes a minimum distance from bends to avoid distortion.
- Add bend reliefs where needed.
Moulded plastic parts
- Keep wall thickness uniform to avoid sink marks and warping.
- Add draft angles so parts release from the mould.
- Use ribs instead of thick sections for stiffness.
- Avoid undercuts unless necessary, because they need complex tooling.
Design for assembly (DFA)
- Reduce part count and fastener count.
- Design parts that can only be assembled one way (poka-yoke).
- Allow tool access for fastening.
- Prefer assembly from one direction, usually top-down.
Review checklist
Before releasing a design, review it with a manufacturing engineer and supplier, check tolerances against function, and estimate cost for each major feature.
Your next steps
- Set tolerances only as tight as function needs
- Use standard sizes, radii and fasteners
- Keep moulded walls uniform with draft
- Review designs with manufacturing before release
General guidance for learning, not professional, legal or financial advice. Want help for your own situation? Book 1:1 career help.


