CFD basics explained: how flow simulation works
Written by LitCareer · 13 Oct 2026 · 2 min read
The main steps of a CFD study, key choices like turbulence models and meshing, and how to trust your results.
What CFD does
Computational fluid dynamics (CFD) predicts how liquids and gases flow, and how heat moves with them. It is used to design pumps, fans, HVAC systems, vehicles, aircraft, electronic cooling, combustion systems and more. The flow region is divided into small cells, and the software solves conservation equations for mass, momentum and energy.
The steps of a CFD study
- Define the goal: pressure drop, flow distribution, heat transfer, forces?
- Prepare the geometry: extract the fluid region and simplify unnecessary details.
- Mesh: finer cells near walls and where flow changes quickly. Boundary layer (inflation) layers are important for wall effects.
- Choose physics: steady or transient, laminar or turbulent, compressible or incompressible, heat transfer.
- Set boundary conditions: inlets, outlets, walls and their thermal conditions.
- Solve and monitor convergence: residuals should fall, and key quantities such as pressure drop should stop changing.
- Post-process and validate.
Turbulence models
Most industrial flows are turbulent. RANS models such as k-epsilon and k-omega SST are common for engineering work because they are affordable. Each has strengths; k-omega SST is often preferred where flow separation matters. The required mesh near walls depends on the model and wall treatment.
How to trust results
- Check mesh independence: refine and confirm key results don't change significantly.
- Check mass and energy balance between inlets and outlets.
- Compare with experiments, published data or simple calculations.
- Be sceptical of results with poor convergence.
Learning path
Strengthen fluid mechanics and heat transfer first. Start with classic validation cases such as flow in a pipe or over a backward-facing step, where results are well documented.
Your next steps
- Define the quantity you need before modelling
- Add proper boundary layers near walls
- Monitor key quantities, not just residuals
- Validate with classic benchmark cases
General guidance for learning, not professional, legal or financial advice. Want help for your own situation? Book 1:1 career help.


