Process capability made simple: Cp and Cpk explained

Written by LitCareer · 13 Oct 2026 · 2 min read

How to tell whether a process can consistently meet its specification limits, with the formulas and what the numbers mean.

Process capability made simple: Cp and Cpk explained

The question capability answers

Specification limits come from the customer or design: for example, a shaft diameter must be between 19.95 and 20.05 mm. Process capability tells you whether your process naturally produces parts inside those limits, consistently.

Cp: is the process spread narrow enough?

Cp compares the width of the specification with the natural spread of the process (six standard deviations):

Cp ignores where the process is centred. It only asks whether the spread could fit.

Cpk: is it narrow enough and well centred?

Cpk looks at the distance from the process mean to the nearer specification limit:

If the process is perfectly centred, Cpk equals Cp. If it drifts towards one limit, Cpk drops.

Reading the numbers

Before calculating

Improving capability

If Cpk is low but Cp is fine, re-centre the process. If both are low, you need to reduce variation: look at material, machine settings, methods and measurement.

Your next steps

  • Check stability with a control chart before calculating capability
  • Use Cpk to see centring as well as spread
  • Compare results with your customer’s required minimum
  • Re-centre if Cp is fine but Cpk is low

General guidance for learning, not professional, legal or financial advice. Want help for your own situation? Book 1:1 career help.

More in Six Sigma & quality

Keep learning